Having seen some of the elaborate modifications W fishing kayak owners employ to attach paddles and other gizmos to their W’s, I thought I’d share a really easy, low-cost, no-weight method that I use.
When I first got my W’s, I drilled holes on each corner of the cockpit rim, primarily so that I could drain water out of the interior when turned upside down after washing down. Then I attached short pieces of waterproof rope thru the holes, knotting the bottom of each end to secure them(large flexible rubber washers can be installed about the knots to ensure that they don’t come thru the holes, but really aren’t needed). Finally, I attached 8-inch cable ties to the ropes or to the metal eyelets on the W to create carrying loops. You can see how I carry my Stick-it anchoring rod (stake out pole) on these devices.
Different sizes of metal clips can also be installed on the ropes to handle a paddle. By having holes and ropes on each corner of the rim, I can also attach an anchor to each, thereby eliminating the need for a pulley system (this works best if you can get by with just one length of anchor rope like you can fishing the shallow Florida flats).