By Fin Gold
I usually keep my Wavewalk S4 on my dock so I can use it right there. But sometimes, we like to explore other areas. I don’t have a truck to transport it, so I decided to convert an old sailboat trailer into a Wavewalk S4 trailer.
All it took was some treated 2×6 and 2×4 boards, some U-bolts, and some ceramic deck screws.
I started with the trailer for a [brand name] sailing catamaran that I don’t use.
I’ve never trailered that boat.
The first step was to attach two 2×6 boards each with a U-bolt on the front and the back. On top of those, I screwed five 2×6 cross-boards so they support the boat from underneath all the way from front to back. Then I added 2×4 boards on both of the outside edges to provide an outer groove for the S4 to sit inside. A set of rollers from the sailboat trailer act as guides to align the inner hull of the S4.
The result? A very light but stable platform to pull my Wavewalk S4. When we get to the boat ramp we just back it down the ramp and the S4 slides off the trailer with an easy push. You should have seen the faces of the big boat owners at the ramp when I launched my boat with one finger!
The key to trailering the boat is to make sure it is tied down securely in the front and the back so that it doesn’t slide forward or backwards. I also have two lines over the top of the boat to hold it down, but be
careful not to over-tighten these and compress the hull. Also, remember to tilt the motor up if you have one so it doesn’t hit the ground as you trailer it.
Having a homemade trailer can extend the range of your Wavewalk adventures and save the hassle of loading it in or on top of your vehicle. All it takes is a used trailer and some treated boards!