The Kayak Fishing 101 website is dedicated to helping the beginning kayak angler, and one of the questions that some new Wavewalk anglers ask themselves is “Do I need to outfit my W with a seat?” By seat they mean an additional seating device on top of the W saddle-seat. Typically, such thoughts about ‘upgrading’ revolve around a swivel seat “bass boat style”, or something more simple.
There is no such need in reality, unless you want to sit much higher in a position that’s intermediary between sitting and standing, but since outfitting a kayak for fishing is a lot of fun, beginning anglers are sometimes motivated to overdo things.
There is no point in discussing in detail all the possibilities for outfitting a Wavewalk TM fishing kayak with an extra seat , but if the reader is interested in getting more information on this subject, and who knows – maybe some inspiration, they can find dozens of kayak seat articles and reviews on the Wavewalk website »
The battery for the motor is located in the front, between the hull tips, in special wooden box I made. More about motorized kayak fishing >
I’ve had the kayak out a number of times now and am dialing in my photography setup. I found that splaying the tripod across the top of the cockpit is much better than having the legs inside. This way, I have more room for my own legs and cargo and I can slide in nice and close to the camera. I added some hooks to the inside so that I can keep the tripod nice and secure given the weight and expense of the photo gear. I can control the kayak and casually paddle while facing the camera with ease. I just lay the paddle across my legs while shooting which works well. If I have a long distance to cover and don’t want to take the setup down, I’ll turn the other way to avoid striking the tripod while paddling more aggressively.
Things are working out well! I’ve got some great photos of herons and pelicans already – much better than the past years of trying to get close by foot.
More about rigging your fishing kayak >
In my never ending quest to simplify and diversify using my Wavewalk kayak, I just added a cable anchoring system.
I first assembled the pulley arrangement as per Jeff McGovern’s video in the rigging section of the W website (which had both the top and bottom sections of the cord at the pulleys spaced outside the carrying handles), but experienced problems with the cord coming off the pulley when moved forward or backward. So I repositioned the pulleys as shown so that the top cord passes to the inside of the carrying handle while the bottom cord passes to its outside.
This seems to work OK but I’ll give it a good test over the next week when the water around here clears after Debbie did her thing. If a problem persists, I’ll replace the plastic pulleys with the small metal ones that have built in shields to keep the cord from slipping off.
By doubling up on the anchor line as shown I can let out about 10 feet (which works well 90% of the time on the flats here), but can also easily convert it into a single 20 foot line when needed.
Of course, I also still have the option of my 6-foot metal clip fish stringer to anchor while fishing in a foot or two of water using the ropes installed through holes drilled in the top rim of the W.
Hopefully, I’ll get out later this week after the water clears. It was chocolate brown and full of grass and weeds when I checked it out over the weekend.
More about rigging your fishing kayak >
We keep talking about turning the wave walker into a robot..autonomous surface vehicle..so I don’t have to drive!…haven’t done it yet but will let you know when we do. We have lots of robotic underwater vehicles here so on the surface is easy.
Hope all is well with you and you are having a good summer.
Note this kayak is outfitted with two motor mounts – The one in the front serves for mounting scientific gear
Wide wheel cart for transporting the heavily loaded kayak over long distances on sandy beaches
More fishing kayak articles >>